Soldering

SO5055

Working machine but could use some cleaning, Has Lead & RoHS pumps and solder pots. Only has a spray fluxer.

SO4735
(Sold)

Compact bench soldering/tinning machine. Can solder. 16″ X 16″ boards, foam fluxer, holds 60 pounds of solder. 208/240 volts, single phase..

SO4734
(Sold)

Lead tinning system that canstrip, fluxs,tin, re-tin and soderability test electronic components. Features batch load access.static solder pot for scavenge, a dynamic flux station, and a dynamoic solder pot (DSP) station for application of new alloy. New in 2017.

SO5001

2004 Vintage including 63/37 Tin/Lead Solder; Solder Pot automated roll out and lead clearance/jacking control; Contour Wave (Nitrogen)
Hot Air Knife; Rotary Chip Wave; Bottom side Convection Preheaters (2); USI Performa Ultrasonic spray Fluxer in external Cabinet(using No Clean Flux); VVL conveyor Fingers 3mm L’s; (Automated width adjust); Integrated CO2 Fire Suppression System;

SO4745
(Sold)

SEHO StartSelective
Vintage 2019
The perfect plug-and-produce selective soldering system for entry-level automated soldering.

SO4711
(Sold)

It is older but it was refurbished in 2007 and has never been used since. Does not have solder in it and has not since it was refurbished. Accessories: Fully automatic computer controlled wave solder – Finger conveyor-Left to Right Process Flow – N2 Ready – External USI spray fluxer – 2 bottom side forced air convection preheaters –1 topside IR Preheater – SMEMA – Finger Cleaner – Contour N2 wave with Omega- Rotary Chip wave- Maximum 16” pcb – solder pot requires 1200 lbs. solder –Motorized conveyor width adjustment- Motorized solder pot in/out, up/down- Finger cleaner. Mfg. Date 9/99. Customer never used it and does not need it. Wants it gone ASAP

SO4730
(Sold)

Vectra 450; 18” finger conveyor; new 5/05, Pot full of AIM SN100 ROHS no lead solder; spray fluxer. A clean machine. 440 volt, 3 phase.

SO4705
(Sold)

Lead and no-lead pots on warming carts,SWAK solfware, lead and lead free nozzle set from 3mm to 25mm; drop jet fluxer installed but never used; (we manually applied flux). No topside preheater. It has very low hours; barely used in the past 4-5 years; New December 2013. A nitrogen generator is available for this machine.

SO4706
(Sold)

Sized to work with 1 KISS machine. Flow at 99.999 purity is 58 CFH. 115 volt. Air supplied to the generator must be a minimum of 110 PSI and between 100°F/38°C and 33°F/0.5°C, with a water dew point of 40°F / 5°C or below.

SO4707
(Sold)

Dual Pot, (leaded and no-lead or both leaded) machines. New 2015 with low usage. Has additional solder nozzles, top side preheat, Drop jet spray head, dual solder nozzles and dual monitors.