Batch Ovens
& Chambers
 |
Used Equipment
Details: |
Item #: |
Image: |
|
Qualmark OVS-4 HALT/HASS
Temperature and Vibration Screening Chamber
|
Operating Range: -100C to +200C Rate: Up to 60C per minute,
depending on load; Vibration: 2Hz to 5KHz at 50Grms; Shaker
Table: 48 inch x 48 inch; Workspace Dimensions: 55 inches W x 54
inches D x 36 inches H (Table in upper position); Workspace
Dimensions: 55 inches W x 54 inches D x 54 inches H (Table in
lower position)
Temp. Control: Qualmark Integrated Control System; Temp.
High/Low limit: Honeywell UDC-2005; Temp. High limit
(Redundant): Omega 6132 Series UL,CSA,VDE; Integrated Computer
with Qualmark OVS Manager Software v. 2.20; Electric Heating /
LN2 Cooling; New 1998
Operating Manual Included. 480V, 3Phase, 60Hz, 150A
 |
OV3806 |
 |
Proheco Drying Oven
|
Large double door batch oven for Drying.
Input: 240VAC, 3-phase, 37A, Digital Temperature control and
display, Over-temp protection, Includes service disconnect, cord
w/plug, Five (5) shelf rails on 6 inch |
OV3802 |
 |
Thermotron F-32-CHV-707-705 Agree Chamber w/ LAB Mechanical
Shaker Table
SOLD |
Used to burn in circuit cards for aircraft radar altimeters
typically for 48 hrs. at -62C to +85C at 10-15C/min rate The
chamber is plumbed for LN2 to supplement the refrigeration for
fast pull downs This is an AGREE chamber which is specifically
designed to run Burn-In profiles, including sine vibration, if
needed. The cycles are programmed via a built in Watlow
Programmable controller. The profiles are generated using any
text editor and downloaded to the controller via serial RS-232.
There is a chart recorder and two programmable event triggers (vib
and whatever) and a product saver. The product saver is set for
a high or low temp override to sound an alarm if the
refrigeration, or LN2 or Heater fails to turn off, etc. Test was
all hands off, we used the event triggers to start vibration and
turn on test equipment, etc. Also, recently the chamber was
converted from R-502/R-13 refrigerant to R-402 (SUVA
HP80)/SUVA-95. The chamber can be operated with or w/o the
vibration unit. It has two ports for electrical
interconnections to product and a large 18in/18in window. The
recommended service power requirements are 460V, 60Hz, 3 phase,
60A. The heater is 33A, the two 7.5 Hp compressors are 15.4A
max. See attached low res photo.
LAB Shaker Table is BRFCCD-36-500. Max test load is 500 lbs, max
acceleration is 3.2G's, max displacement at max load (double
amplitude 0.080 in, 3000 lb force. Frequency is 8-60 hz,
vertical axis.
|
OV3760 |
_small1.JPG) |
Blue M Model C026 Batch Oven
SOLD |
Batch oven for Baking. 208 volts, 3 phase, 60hz.
|
OV3769 |
 |
Cincinnati Sub Zero Chamber
SOLD |
Cincinnati Sub Zero ZH-32-2-2-H/AC environmental
chamber, With chart recorder and Powervar power conditioner.
2 Available
 |
OV3766 |
 |
National
Appliance Co.
SOLD
|
National
Appliance Co. oven. Electrical information: 240v/60Hz/1ph/2800w
Model: 430-7, S/N: 10-79-1373
- Chamber size: W: 41" x H: 23.5" x D: 17.5"
- Exterior dimensions: W: 46.5" x H: 36" x D: 23"
- View Image 2:
National Appliance Co. oven |
MI3573 |
 |
VWR 1650 Oven
SOLD
|
Digital
controls and Stainless interior. Electrical information:
208/220v, 1ph, 60Hz, 5100w
Model: 1650, S/N: 1650-43
- Chamber size: W: 45" x H: 30" x D: 21"
- Exterior dimensions: W: 58.5" x H: 49" x D: 26.5"
- View Image 2:
VWR Oven |
MI3574 |
 |
|
.JPG)
